Model complex 3D architectural geometry with Rhinoceros

For my introductory classes on 3D Freeform modelling, I re-recorded my Rhino video tutorials. This time, they are in English, so should appeal to more people.

What can you expect to learn?
This is a basic introduction and overview of modelling complex 3D Freeform shapes in the context of architectural design.
Have you ever wondered how certain architectural designs are actually created? You might assume that it is helped by software, but which system is suited for this? In regular CAD software that architects often use, such as AutoCAD or SketchUp, the creation of organic models and surfaces is hard to impossible.
We use Rhinoceros, a quite popular NURBS modelling software for McNeel. This is very popular within several innovative architectural offices where it is used for complex forms, organic architecture and extensive tweaking of 3D models. The software can also be used complementary to other architectural design software, although it is quite complete in itself.
The course starts with a basic introduction and overview of the software and then a few example projects are developed. They are inspired by famous and iconic architectural projects, but are not full reconstruction. We use the examples to inspire you and focus on a certain part of element which we will strip down to the basic geometric operations, giving you insight in how to approach more complex projects.
You don’t need any other software then Rhinoceros, on Windows or OSX, but be ready to try and fail, often. As many modelling tasks require a specific order of operations. We cannot prepare a solution for every possible task, but by building upon a few basic examples, you learn an approach which focuses on dividing the task at hand into smaller problems, that are easier to tackle. And these can then be applied in other situations.
So come join us and learn the basics of 3D Freeform Modelling with Rhinoceros.
Discount Coupon
Here is a coupon code to get you the course for $9 instead of $49. Valid while supplies last…
https://www.udemy.com/model-complex-3d-architectural-geometry-with-rhinoceros/?couponCode=rh1n0-4theblogspotters

Comments

Improve usage of BIM during early design phases

When I was collecting ideas for a book chapter on BIM (that seemed to never have emerged after that), I collected 10 ideas, which I believe still reflect good recommendations to improve the usage of BIM during the early design phases. These ideas are related to BIM software, but you can apply them in any flavor, as long as you can model with Building Elements, Spaces and have control over representation. Introduction This article gives an overview of several recommendations and tips, to better apply BIM applications and BIM methodologies, in the context of the early design phases. Many of these tips are applicable in any BIM application and they are based on experience gathered from teaching, researching and using BIM software. Sometimes they could help software developers to improve the workflow of their particular BIM implementation. Tip 1 : Gradually increase the amount of information In the early design phases, the architect makes assumptions and lays out the main design in

Getting BIM data into Unity (Part 9 - using IfcConvert)

This is part 9 of a series of posts about getting BIM data into Unity. In this post, we’ll discuss the IfcConvert utility from the IfcOpenShell Open Source IFC Library to preprocess an IFC model for integration with Unity. This is (finally?) again a coding post, with some scripts which are shared to build upon. Conversion of IFC into Unity-friendly formats The strategy with this approach is that you preprocess the IFC-file into more manageable formats for Unity integration. Most Web-platforms do some sort of pre-processing anyway, so what you see in your browsers is almost never an IFC-file, but an optimised Mesh-based geometric representation. However, it wouldn’t be BIM-related if we’d limit ourselves to the geometry, so we will parse the model information as well, albeit using another, pre-processed file. IFC to Wavefront OBJ I used a test IFC-model and used the IfcConvert-utility converted it into OBJ en XML formats. The default way to use it is very simple:

Getting BIM data into Unity (Part 8 - Strategies to tackle IFC)

This is part 8 of a series of posts about getting BIM data into Unity. In this post, we’ll discuss IFC as a transfer format towards Unity. As with the previous post, this is not a coding post, although hints and examples are provided. Open BIM and IFC Everybody who ever met me or heard me present on a conference or BIM-lecture will not be surprised to hear that I’m a strong believer in the Industry Foundation Classes (IFC), an open standard, with already two versions published as an ISO standard, being IFC2x2 and IFC4 (but surprisingly not IFC2x3 which is widely used). In the ideal world, this would be the format to use to transfer BIM data into another environment, such as Unity. So what are our options? Looking in the Unity Asset Store Assimp is a library which supports multiple formats, including IFC. https://assetstore.unity.com/packages/tools/modeling/trilib-unity-model-loader-package-91777 I did a few attempts, but alas without any success. It is possib

CAD, BIM & 3D

Search This Blog